Mostrando 217–246 de 246 resultados

Show sidebar
Close

SIM808 GPS/GPRS/GSM Shield For Arduino

S/175.00
INTRODUCTION SIM808 GPS/GPRS/GSM Arduino Shield is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino shield. A credit card size
Close

Solenoide – 5V (Small)

S/21.00
Descripcion: Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller
Close

SparkFun Energy Harvester Breakout – LTC3588

S/115.00
This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for
Close

SparkFun MicroView – OLED Arduino Module

S/165.00
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a
Close

SparkFun Music Instrument Shield

S/145.00
Descripcion: Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound
Close

SparkFun ProtoShield Kit

S/49.00
Descripcion: The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with
Close

SparkFun RedBot Sensor – Accelerometer

S/15.00
Descripcion: The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by
Close

SparkFun Weather Shield – Shield para estacion metereologica

S/169.00
Descripcion: The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity
Close

SparkFun WiFly Shield (para Wifi)

S/210.00
Descripcion: The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the
Close

SparkFun XBee Shield

S/75.00
Descripcion: XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier
Close

Tarjeta para XBee

S/7.00
Tarjeta para XBee, es la tarjeta sola, necesita los xbee 2mm hembra para soldarlo. esta tarjeta permite adaptar el xbee al protoboard.
Close

Tarjeta XBee con 2 socket 2mm 10pin

S/9.00
Debe soldar los pines hembra a la tarjeta xbee. Para conectar el xbee al protoboard

Teclado para Raspberry

S/45.00 S/39.00
Teclado inalambrico para Raspberry, tiene una pequeña zona donde hace las funciones de mouse, ideal para hacer trabajos simples en Raspberry. Necesita colocarlo 2 pilas AAA para su funcionamiento.
Close

Teensy 3.6

S/159.00
Descripcion: The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 180MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also four separate interval timers plus a delay timer! Oh yeah, and all digital pins have interrupt capability and are 3.3V tolerant. All of this functionality is jammed into a 62.3mm x 18.0mm board with all solder points on a 0.1" grid so you can slap it on a breadboard and get to work! The Teensy 3.6 (as well as its sibling, the Teensy 3.5) is larger, faster and capable of more complex projects, especially with its onboard micro SD card port. An upgraded ARM Cortex MCU (180MHz from 72MHz), more memory (1M from 256K), as well as more RAM, EEPROM and accessible pins make up the key new features of this "teensy" board. The Teensy 3.6 is slightly scaled up from the Teensy 3.5 but is offered at a higher price point, comparatively. Caracteristicas:
  • 180 MHz ARM Cortex-M4 with Floating Point Unit
  • 1M Flash, 256K RAM, 4K EEPROM
  • Microcontroller Chip MK66FX1M0VMD18
  • USB High Speed (480Mbit/sec) Port
  • 2 CAN Bus Ports
  • 32 General Purpose DMA Channels
  • 22 PWM Outputs
  • 4 I2C Ports
  • 11 Touch-Sensing Inputs
  • 62 I/O Pins (42 breadboard friendly)
  • 25 Analog Inputs to 2 ADCs with 13-bit resolution
  • 2 Analog Outputs (DACs) with 12-bit resolution
  • USB Full Speed (12Mbit/sec) Port
  • Ethernet mac, capable of full 100Mbit/sec speed
  • Native (4-bit SDIO) micro SD card port
  • I2S Audio Port, 4-Channel Digital Audio Input & Output
  • 14 Hardware Timers
  • Cryptographic Acceleration Unit
  • Random Number Generator
  • CRC Computation Unit
  • 6 Serial Ports (2 with FIFO and Fast Baud Rates)
  • 3 SPI Ports (1 with FIFO)
  • Real-Time Clock
  • 62.3mm x 18.0mm x 4.2mm (2.5in x 0.7in x 0.2in)
Documentos:
Close

The Micro+ Black

S/1,650.00
Descripcion: Say hello to The Micro+ 3D printer by M3D! The magic of 3D printing is now more affordable and
Close

UART MP3 Voice Module with 8MB Flash Memory

S/24.00
INTRODUCTION Do you always feel like the DIY work is boring, not attractive or no vitality when you design it
Close

Uno R3 Compatible

S/37.00
UNO R3 compatible, en su version economica, viene con cable USB
Close

Weather Meter Kit (Estacion metereologica)

S/319.00
Descripcion: Whether you’re an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a
Close

Wifi ESP8266

S/12.00
Modulo Wifi ESP8266, para comunicar el Arduino mediante Wifi a cualquier otro dispositivo que sea IP.
Close

Wifi ESP8266 con Adaptador

S/16.00
Modulo ESP8266 con Adaptador de 3.3 a 5V, para conectarlo directamente al Serial del Arduino y trabajar con el.
Close

XBee Explorer USB (Calidad Sparkfun)

S/109.00
Este adaptador de Sparkfun permite configurar el XBee con el software XCTU, necesitara adicionalmente un cable MiniUSB
Close

XBee Regulated

S/29.00
XBe regulated, esta tarjeta es similar a la tarjeta XBee(con pines 2mm soldados) para conectarlo al protoboard (necesita adicionalmente ponerle los pines macho para el protboard), adicionalmente tiene las salidas de 5V, GND para energizarse y lo convierte a 3.3V para energizar el Xbee, y tambien tiene los pines Rx,Tx tambien convertido de 5V a 3.3V, con esto facilita su conexion a un microcontrolador como Arduino o PIC, donde puede alimentarse con 5V y conectarse directamente al Serial de ellos, dado que ya tiene el conversor. Nota: Solo el Tx,Rx que tiene salidas especiales tiene la conversion, si usa los otros pines estos estaran a 3.3V

XBee S2C

S/95.00
Modulo XBee S2C con antena incorporada, modulo ideal para hacer prototipos y pruebas, aquí sus principales características comparándolo con el XBee3

Características

  • Out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and ZigBee PRO protocols
  • Transceiver chipset: Silicon Labs EM357 SoC
  • Data Rate RF: 250Kbps, serial up to 1Mbps
  • Indoor/urban range: 200-ft. (60m) 300-ft. (90m)
  • Outdoor/RF line-of-sight range: 4000-ft. (1200m) 2 miles (3200m)
  • Transmit power: 3.1mW (+5dBm)/6.3mW (+8dBm) boost mode 63mW (+18dBm)
  • Receiver sensitivity: (1% PER) -100dBm/-102dBm boost mode -101dBm
  • Serial Data Interface: UART, SPI
  • Configuration Method: API or AT commands, local or over-the-air (OTA)
  • Frequency Band: ISM 2.4GHz
  • Form factor: through-hole, surface mount
  • Hardware: S2C
  • ADC inputs: (4) 10-bit ADC inputs
  • Digital I/O: 15
Close

XBee S3B RPSMA

S/180.00
XBee-PRO 900HP (S3B) DigiMesh, 920MHz (Australia), 250mW, RPSMA, 200Kbps Este modulo tiene el firmware Australiano, el cual solo opera de
Close

XBee S3B UFL

S/180.00
XBee-PRO 900HP (S3B) DigiMesh, 920MHz (Australia), 250mW, UFL, 200Kbps Este modulo tiene el firmware Australiano, el cual solo opera de
Close

XBee S6B (WiFi)

S/139.00
Descripcion: WiFi 802.11b/g/n Transceiver Module 2.4GHz Integrated, Wire Antenna Through Hole Media & Downloads RESOURCE TYPE LINK Datasheets DIGI XBEE®
Close

XBee Shield V2 For Arduino

S/45.00
Description: This Bee Shield simplifies the task of interfacing an XBee/WiFiBee/BluetoothBee with your Arduino. This board mates directly with an Arduino
Close

XBee USB Adapter con cable (Calidad)

S/33.00
Xbee USB Adapter con cable miniUSB, este adaptador permite configurar el XBee en el software XCTU para su funcionamiento. Caracteristicas
  •  Used for the XBee module configuration parameters
  •  Easily connected to a PC via mini USB cable
  •  XBee-setting support software X-CTU
  •  Also used as a USB-TTL adapter
  •  Voltage: +5V(USB Power)
Documentos:
Close

XBee3 Pro RPSMA

S/165.00
Deseas saber como diferenciarlo fisicamente de un XBee3 normal, en este video te lo explicamos. El Xbee3 es el reemplazo
Close

XBee3 RPSMA

S/105.00
Deseas saber como diferenciarlo fisicamente de un XBee3 Pro, aca te lo explicamos. Este modulo se puede comunicar con el