Mostrando los 7 resultados

XBee S3B RPSMA

S/250.00
XBee-PRO 900HP (S3B) DigiMesh, 920MHz (Australia), 250mW, RPSMA, 200Kbps Este modulo tiene el firmware Australiano, el cual solo opera de

XBee S2C

S/139.00
Modulo XBee S2C con antena incorporada, modulo ideal para hacer prototipos y pruebas, aquí sus principales características comparándolo con el XBee3

Características

  • Out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and ZigBee PRO protocols
  • Transceiver chipset: Silicon Labs EM357 SoC
  • Data Rate RF: 250Kbps, serial up to 1Mbps
  • Indoor/urban range: 200-ft. (60m) 300-ft. (90m)
  • Outdoor/RF line-of-sight range: 4000-ft. (1200m) 2 miles (3200m)
  • Transmit power: 3.1mW (+5dBm)/6.3mW (+8dBm) boost mode 63mW (+18dBm)
  • Receiver sensitivity: (1% PER) -100dBm/-102dBm boost mode -101dBm
  • Serial Data Interface: UART, SPI
  • Configuration Method: API or AT commands, local or over-the-air (OTA)
  • Frequency Band: ISM 2.4GHz
  • Form factor: through-hole, surface mount
  • Hardware: S2C
  • ADC inputs: (4) 10-bit ADC inputs
  • Digital I/O: 15

XBee3 RPSMA

S/135.00
Deseas saber como diferenciarlo fisicamente de un XBee3 Pro, aca te lo explicamos. Este modulo se puede comunicar con el

XBee S3B UFL

S/250.00
XBee-PRO 900HP (S3B) DigiMesh, 920MHz (Australia), 250mW, UFL, 200Kbps Este modulo tiene el firmware Australiano, el cual solo opera de

XBee S6B (WiFi)

S/139.00
Descripcion: WiFi 802.11b/g/n Transceiver Module 2.4GHz Integrated, Wire Antenna Through Hole Media & Downloads RESOURCE TYPE LINK Datasheets DIGI XBEE®

XBee3 Pro RPSMA

S/199.00
Deseas saber como diferenciarlo fisicamente de un XBee3 normal, en este video te lo explicamos. El Xbee3 es el reemplazo